不繡鋼材質的1.4313是馬氏體級，耐蝕化高朝，熱外理后耐久性性好。X3CrNiMo13-4鋼的機性是因此催化有效成分中鉬和鎳的高溶度。那些鋁合金含有劑約束了新增級碳溶度的必須要 ——給定溶度很于奧氏體不繡鋼材質的。現在鎳溶度較低，但鎳溶度約為4%，差異性的提升了鋼對各方面蝕化區域環境的抗御力——再次機性。X3CrNiMo13-4鋼粉絲可產量高至300℃在室內溫度下業務的加工元件和加工元件，及其表露在各方面蝕化區域環境中的加工元件，同一做到可以的接觸面能力括抗氯化物質地)。QT650.QT780和QT900能力下，熱外理后最易交付使用形鋼。半成品用作石油天然氣產量.有機化工.在化工和清潔能源相關行業，鍋輪機表露在高和緩較低溫度下.泵.壓解機部件。鋼隱疼合補焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50銷售EN1.4313馬氏體不銹鋼裝飾管嗎有去應力退火屬性（+A）情形、退火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，所需哪另一個有一定要跟行業說了解哦。